ZiP-It 3/8"- 5/8" Wallboard Anchor
BLACKBOOKp.2340Request a BLACKBOOK
Wall Thickness3/8"- 5/8"
DescriptionZinc Anchors & #6 x 1" Screws
The Zip-It anchor is a one piece self drilling anchor designed for use in hollow gypsum wallboard for light duty loads. During installation, the unique drill tip of the Zip-It uses four offset blades to ensure fast and true cutting. Two blades are cutting blades and the other two are guide blades that stabilize the anchor for speed and accuracy during installation. The holding capacity of the anchor is achieved through a unique thread design. Thin, knife like threads have an oversized outer diameter that cuts deeply and cleanly into the wallboard to spread the load over a large bearing area while the tapered root of the threaded section compacts the wall material around the anchor to further increase the load capacity. Once fully seated, the collar of the Zip-it sets flush to the surface of the wallboard.
Typically ships in 2-4 days
$21.00 BX - Box(BOX = 100)